Development and Promotion of the Reversible Airflow Flatbed Dryer in the Philippines

Dexter  Madrona,; Nyuyen Thanh  Nghi,; Le Quang  Vinh,; John Eric  O. Abon,; Eden  C. Gagelonia,; Caesar Joventino  M. Tado,

Development and Promotion of the Reversible Airflow Flatbed Dryer in the Philippines

Abstract:

A flatbed dryer with a reversible airflow was introduced in the Philippines through a collaborative project between Nong Lam University of Vietnam and the Philippine Rice Research Institute (PhilRice). In this design, airflow is reversed at some point during the drying period to achieve uniform drying without mixing the grain. An 8-ton capacity dryer was constructed at PhilRice Central Experiment Station in Nueva Ecija to evaluate its performance and adaptability under Philippine conditions. Appropriate and locally available materials were used in the construction of the pilot unit. Nine (9) additional dryers were then constructed at PhilRice stations (Nueva Ecija, Isabela, Negros, Agusan, Central Mindanao University, and Midsayap) that served as pilot units for technology promotion in their respective areas of coverage. Performance of the dryer was evaluated in terms of the following parameters: (1) drying; (2) quality of dried grains; and (3) economic analysis of using the dryer. The performance evaluation was conducted in three drying batches of newly harvested rice seeds. Paddy dried with the reversible airflow flatbed dryer at full load capacity has a uniform moisture content with one percent (1%) moisture gradient at different layers of the grain mass along the depth and across the drying bin. The drying rate was 1% moisture reduction per hour. The drying cost of using the reversible dryer is PhP0.74 per kg which is lower than the prevailing mechanical drying cost of PhP1.13 per kg. It has a payback period of 2.5 years and break-even point of 53.0 batches/year. To date, eight (8) privately-owned units have already been constructed and fully operational in the provinces of Nueva Ecija, Quirino, and Bukidnon, with PhilRice receiving inquiries from interested individuals here and abroad regarding the technology.

References:

GAGELONIA, E.C., MARTINEZ, R., and D. ALOJADO. 2013. Mechanized drying of paddy: an industry concern. Paper presented during the Asia Rice Foundation Annual Rice Forum. Bureau of Soils and Water Management Bldg., Quezon City, 22 November 2013.
HIEN, P.H. 2010. Harvesting and drying of rice in Vietnam. In: Bong BB, Bo NV, Buu BC (eds) Vietnam Fifty Years of Research and Development. Agriculture Publishing House, Hanoi. pp. 361-380.
HIEN, P.H., TAM, N.H. and N.V. XUAN. 2003. Study on the reversal timing for the SRA reversible dryer. Paper presented at the Seminar on “Agricultural Engineering and Agro-products Processing Towards Mechanization and Modernization in Rural Areas”. Nong-Lam University, Ho Chi Minh City. 11-12 December 2003.
KUIZON, P. 1995. Rice husk furnace and reversible airflow grain dryer. In: Champ BR, Highley E, Johnson Gl (eds) Grain Drying in Asia. ACIAR Proceedings No. 71. pp. 356-359.
PAES 201:2000. Agricultural Machinery Heated-Air Mechanical Grain Dryer - Specifications. Philippine Agricultural Engineering Standards, Vol. 1. pp. B-1-B-8.
PAES 202:2000. Agricultural Machinery Heated-Air Mechanical Grain Dryer - Methods of Test. Philippine Agricultural Engineering Standards, Vol. 1. pp. B-12-B-36.
PCARRD. 2009. Agricultural Mechanization in the Philippines. PCARRD Book Series No. 179/2009.
VINH, L. Q. 2011. Comparative Study of the Performance of the Reversible Airflow Dryer and the Conventional Flatbed Dryer. (MSc thesis), Cental Luzon State University, Nueva Ecija, Philippines.