HomeInternational Journal of Research in Advanced Studies and Graduate Educationvol. 1 no. 1 (2025)

Microwave Radio Link Design For The Extension Of The Point-Of-Presence (Pop) Bandwidth

Benedict Aquino | Steffan Dale Dean Martensen | Nicholai Christopher Nora | Ariel Lorenzo

Discipline: electrical and electronic engineering

 

Abstract:

This study conducted a design simulation for a microwave radio link for the extension of the bandwidth from the Point-of-Presence facility. The microwave radio link design was simulated using the Pathloss tool and the modulation technique of 128 QAM modulation. Different antenna dimensions of 1.8m, 1.2m, and 0.6m were used in order to perform design simulations to correlate stated variables that are characterized for the microwave link. Based on the design simulations, Design Simulation 3 with the smallest antenna dimension of 0.6m resulted in a minimal link unavailability of 0.08 minutes and had the highest link availability of 99.99998%, which translates to a reliable radio link that is within the reference of the acceptable range of values for link availability. As the dimensions of the antenna were changed, there was a significant change in the link unavailability time. Small diameter antennas are favorable to use, when possible, because of their small aperture for wind and tower, which results in considerably less tower leasing costs.



References:

  1. Adinde, C. A., Obi, O. C., Okorogu, V. N., & Nwalozie, G. C. (2013). Performance evaluation of modulation schemes used for digital microwave communication systems.
  2. Aviat Networks. (n.d.). Aviat’s system gain advantage and the positive impact on your microwave network’s total cost of ownership. Retrieved May 22, 2022, from https://blog.aviatnetworks.com/system-gain-advantage-tco/
  3. Dengia, G., Jemal, T., & Catolos, S. (2017). Microwave link design between Jimma main campus and Agaro branch.
  4. Gabbrielli, B., & Gilardi, G. (2000). Microwave modules for high-capacity urban radio systems with 128 QAM modulation.
  5. Hanafi, M. M., EL-Saba, M. H., & Elsayed, H. A. (2016). Design and implementation of microwave planning tool with studying the effect of various aspects.
  6. Liang, C., & Yu, F. R. (2015). Wireless network virtualization: A survey, some research issues and challenges.
  7. Soe, L. N., Zaw, K. T., & Aung, W. P. (2019). System consideration, design, and implementation of point-to-point microwave link for internet access.
  8. Varli, D., & Benzer, R. (2017). Evaluation of radio link design with different modulation and antenna schemes.
  9. Wells, J. (2010). Multi-gigabit microwave and millimeter-wave wireless communications.
  10. Yang, Y., Zhang, L., Maheshwari, R., Kahn, Z. A., Agarwal, D., & Dubey, S. (2016). Scout: A point of presence recommendation system using real user monitoring data.