Home⇛Isabela State University Linker: Journal of Engineering, Computing and Technology⇛vol. 2 no. 1 (2025)

Development and Performance Evaluation of Locally Manufactured Tractor-Drawn Plastic Mulch-Laying Implement Using Disc Plow at Different Forward Speeds

Everich P. Ramos | Cesar B. Mangadap | Joel M. Alcaraz | Jeoffrey Lloyd R. Bareng

Discipline: Mechanical Engineering

 

Abstract:

The plastic mulch-laying implement was locally developed for the mechanical application of plastic mulch. The implement was developed using locally available materials, resulting in a lower cost of production. It was evaluated to test the soil covering performance using a disc plow at different forward speeds. The implement was evaluated at five forward speeds. The effect of the forward speeds on actual field capacity, field efficiency, and unsecured mulch was studied. The results of the experiment showed that the average actual field capacity is 0.14 ha/hr (1.12 ha/day). At low speed, the actual field capacity decreased, and unsecured mulch increased by an average of 13% and 6%, respectively, compared to the forward speed. The highest field efficiency of 46.14% was achieved at a forward speed. By means of benefit-cost ratio analysis, the plastic mulch-laying implement showed that it is economically viable. The results of this study showed that the plastic mulch-laying implement is reliable and efficient for plastic mulch application. Hence, it recommends using the plastic mulch-laying implement to make raised beds and lay plastic mulch at a forward speed.



References:

  1. Amin, S., Dixit, J., & Muzamil, M. (2022). Integrated plastic mulch laying machine – A viable technology for sustainable agricultural production. Scientific Journal – Agricultural Engineering, 76.
  2. Anon. (2020). Plastic mulching for crop production.
  3. Gao, H., Yan, C., Liu, Q., Ding, W., Chen, B., & Li, Z. (2019). Effects of plastic mulching and plastic residue on agricultural production: A meta-analysis. Science of the Total Environment, 655, 484–492.
  4. Jahun, B. G., Usman, D. D., Saeed, H. A., Ahmad, D., Mahdi, M. R., & Sulaiman, S. (2021). Effects of tractor forward speeds on mulching depths during oil palm frond pulverization. Agricultural Engineering International: CIGR Journal, 23(2), 131–133.
  5. Kothiya, A. V., Monpara, A. M., & Yaduvanshi, B. K. (2021). Performance evaluation of bullock drawn plastic mulch cum drip lateral laying machine. Pantnagar Journal of Research, 19(2), 96.
  6. Malathi, K., Reddy, P., & Balchand, C. (2024). Development and evaluation of manual operated plastic mulch laying machine. Futuristic Trends in Chemical, Material Sciences & Nano Technology, 2(1), 24.
  7. Manickam, L., Thilagam, V. K., Balakrishnan, N., & Mansour, M. M. (2010). Effect of plastic mulch on soil properties and crop growth: A review. Agricultural Reviews, 31(2), 145–149.
  8. Meselhy, A. A. (2020). Development of the wide ridges machine for laying drip irrigation tubes and plastic mulch in Ras Sudr – South of Sinai. International Journal of Applied Agricultural Sciences, 6(5), 135–147.
  9. Parmar, B. S., Shrivastava, A. K., Singh, S. K., Patel, A., & Gajendra, S. (2023). Economic analysis of low-cost tractor drawn plastic mulching machine. International Journal of Environment and Climate Change, 13(10), 2407–2414.
  10. Pathak, S. V., Rangbhal, A. V., Shahare, P. U., Badge, C. S., & More, S. (2023). Performance evaluation of manually operated mulch laying machine on different soil conditions. NASS Journal of Agricultural Sciences, 12(1), 1–6.
  11. Rashid, I. (2020). Potential agricultural and environmental benefits of mulches. Bulletin of the National Research Centre, 44(1), Article 1.
  12. Sarian, Z. B. (2018, December 19). Plastic mulching made easier with a machine. Agriculture Magazine.
  13. Satasiya, R. M., Kothiya, A. V., Sojitra, M. A., Gajjar, P. P., & Chauhan, P. M. (2025). Development and performance evaluation of mini tractor operated plastic mulch laying machine. Plant Archives, 25(Supplement 1), 716–720.
  14. Satasiya, R. M., Kothiya, A. V., Sojitra, M. A., Gajjar, P. P., & Chauhan, P. M. (2025). Development and performance evaluation of mini tractor operated plastic mulch laying machine. Plant Archives, 25(Supplement 1), 716–720.
  15. Tripathy, A., Pradhan, P. L., Behera, D., & Sahoo, P. K. (2020). Development and evaluation of a power tiller operated plastic mulch laying machine. International Journal of Current Microbiology and Applied Sciences, 9(7), 1778–1779.

Tools


Copyright © 2025  KITE Digital Educational Solutions |  Exclusively distributed by CE-Logic