Article List (w/ Mechanical Engineering Discipline)

Open Access Subscription Access


Antimicrobial Compounds from Spondias purpurea

Ragasa, Consolacion Y. | Poblete, Asteria T. | Navida, Eugenio C.

Discipline: Mechanical Engineering

AN X•Y CUTTING TABLE FOR MECHATRONICS TEACHING

Cafia, D.m. | Ching Sai, K.a. | Dizon, D.v. | Iturralde, R.v. | Chua, Alvin Y.

Discipline: Mechanical Engineering

Robotic Arm Pick and Place System

Mabanta, Mark Anthony B. | Pabillaran, Jerome P. | Engr. Adiong, Maridee B.

Discipline: Computer Science, Mechanical Engineering

Field Performance of Ceria-Alumina Catalysts for Automative Exhaust Treatment in Metro Manila

Gallardo, Susan M. | Aida, Takashi | Niiyama, Hiroo

Discipline: Mechanical Engineering

Implementation of Speed and Torque Control on Quadrotor Altitude and Attitude Stability

Magsino, Elmer R. | Dollosa, Christian Michael | Gavinio, Samuel | Hermoso, Gerard | Laco, Nico

Discipline: Mechanical Engineering

The Comparison of Manual and Automatic Transmissions in City Driving

Ursulom, Franc Saudini | Ursulom, Florida U.

Discipline: Mechanical Engineering

Development and Validation of Automobile Technology Learning Environment Inventory in Tertiary Institutions of Nigeria

Shehu, Isma’ila Y. | Enemali, Joseph D. | Muhammad, Muhammad H. | Nordin, Mohd Safarin

Discipline: Mechanical Engineering

Reduction of Condenser Pressure at Mak-Ban Geothermal Power Plant D, Bitin, Bay, Laguna

Aceron, Jayson | Belen, Jayson | Sanchez, Berleth

Discipline: Mechanical Engineering

Adaptation of a Gasoline-Fueled Conventional Engine into a Purified Biogas-Fueled Engine for Power Generation

Villanueva, Eliseo P. | Hernandez, Noel M.

Discipline: Engineering, Mechanical Engineering

Performance Evaluation of Copper-Water Thermosyphons in Glazed Box Solar Water Heater

Vina, Rommel R. | Alagao, Feliciano B.

Discipline: Engineering, Mechanical Engineering

Acceptability of LPG as Fuel for Cars

Serrano, Nicanor L.

Discipline: Economics, Mechanical Engineering

TIP Mechancial Engineering Graduates and their Performance in The Licensure Examinations: Inputs to Educational Policy

Serrano, Nicanor L.

Discipline: Education, Mechanical Engineering

Design of a Low-Cost Compression Testing Machine: A Proposal for Fabrication

Queroljico, Inocentes S.

Discipline: Engineering, Mechanical Engineering

Development of a Trainer on Motor Controls for Engineering Students

Ybañez, Eric L.

Discipline: Education, Genetic Engineering, Mechanical Engineering

COST REDUCTION IN THE OPERATION OF FIRE TUBE BOILER OF TANDUAY DISTILLERS INC. IN CABUYAO, LAGUNA

De Pano, Katarungan B. | Alpa, Ronnel B. | Espanol, Remelique Errol D. | Giron, Regis Gerard P.

Discipline: Mechanical Engineering

PROCESS IMPROVEMENT OF THE SEWAGE TREATMENT PLANT FOR THE CALAMBA PUBLIC MARKET AT GENERAL LIM ST., BRGY. V, CALAMBA CITY, LAGUNA

Almario, Virgilio S. | Basbas, Daryl S. | Dela Cruz, Darence A. | Ragudo, Nico Erik M.

Discipline: Mechanical Engineering

MODIFICATION OF OIL COOLER HOBBING MACHINE IN ASIAN TRANSMISSION CORPORATION AT CANLUBANG, CALAMBA CITY

De Pano, Katarungan B. | Perez, Bryan Kevin P. | Mogallos, Justine Rae A. | Prescilla, Darwin M.

Discipline: Mechanical Engineering

DESIGN OF FIRE PROTECTION SYSTEM OF COLEGIO DE SAN JUAN DE LETRAN CALAMBA

Francisco, Jose R. | Barlan, Adel Jerome D. | Apalla, Joshua N. | Arpon, Neil Dominic C.

Discipline: Mechanical Engineering

IMPROVEMENT OF WASTE WATER DISCHARGE SYSTEM FOR PLANT A OF ABOITIZ POWER RENEWABLES INC. IN BRGY. BITIN, BAY, LAGUNA

Francisco, Jose R. | Dela Cueva, Kevin Arvee T. | Malipol, John Kenneth M. | Nicolas, Richard Benedict T. | Reyes, Arvin M.

Discipline: Mechanical Engineering

IMPROVEMENT OF THE VENTILATION SYSTEM IN A CABLE TRAY FABRICATION AT TAIHEI ALLTECH CONSTRUCTION (PHIL.) INC. IN STA. ROSA CITY, LAGUNA

Dela Cruz, Virgilio | Orjaleza, Mark Joseph O. | Rivera, Ahitofel David Ii R. | Mabalhin, Khim G.

Discipline: Mechanical Engineering

INSTALLATION OF TREATMENT FACILITY FOR WASTE WATER DISCHARGE OF THE SCHOOL CANTEEN OF COLEGIO DE SAN JUAN DE LETRAN CALAMBA

Francisco, Jose R. | Baloran, Kaizer E. | De Guia, Martin Roy M. | Perlez, Danielle Lorenz P.

Discipline: Mechanical Engineering

DESIGN OF AIR VENTILATION SYSTEM FOR THE MANUFACTURING BUILDING OF ASIAN TRANSMISSION CORPORATION (ATC) IN CANLUBANG, CALAMBA, LAGUNA

Francisco, Jose R. | Alipio, Laurenz Anthony G. | Ramilo, Kenneth Aldren N. | Santos, Lester S.

Discipline: Mechanical Engineering

IMPROVEMENT IN THE PERFORMANCE OF THE COOLING TOWER OF M&T INJECTION MOULDING CO. INC. AT CARMONA, CAVITE

Francisco, Jose R. | Pico, Rinell Leri R. | Malacaman, Reymark V. | Victoria, Seth Issa N. | Zarraga, Marco Jerico C.

Discipline: Mechanical Engineering

SOLVENT WASTE RECOVERY OF PHILIPPINE AUTO COMPONENTS, INC. AT CARMELRAY INDUSTRIAL PARK IN CANLUBANG, CALAMBA, LAGUNA

Francisco, Jose R. | Uri, Charmaine L. | Hastie, Ryan Jess A. | Par, Maricar H.

Discipline: Mechanical Engineering

DESIGN OF CENTRALIZED POTABLE WATER TREATMENT FACILITY FOR COLEGIO DE SAN JUAN DE LETRAN – CALAMBA

Francisco, Jose R. | Bautista Jr., Elmer T. | Flancia, Dexter V. | Sangalang, Gerald P.

Discipline: Mechanical Engineering

DESIGN IMPROVEMENT OF AIR CONDITIONING SYSTEM OF DYNAMIC PRODUCT LINE INC. IN CPIP, BATINO, CALAMBA CITY

De Pano, Katarungan B. | Manjares, Ryan P. | Montano, Arvin O. | Panes, Mark Eddie S.

Discipline: Mechanical Engineering

DESIGN OF RAINWATER HARVESTING FACILITY OF COLEGIO DE SAN JUAN DE LETRAN CALAMBA

Francisco, Jose R. | Agawin, David Jhon Walden M. | Balajadia, Jaiel Uziel R. | Falcon, Leo Christian G.

Discipline: Mechanical Engineering

DESIGN OF CENTRALIZED AIR-CONDITIONING SYSTEM FOR OLD GYMNASIUM, FRA ANGELICO HALL, OF COLEGIO DE SAN JUAN DE LETRAN–CALAMBA

Francisco, Jose R. | Lutero, Joey Nino S. | Alforja, Ohnel Jerome B. | Taray, Alnie R.

Discipline: Mechanical Engineering

IMPROVEMENT OF THE WASTEWATER TREATMENT PLANT OF CALAMBA SLAUGHTERHOUSE

Dela Cruz, Virgilio | Urzo, Maria Suzine M. | Aliwalas, Maureen T. | Paunlagui, Michael C.

Discipline: Mechanical Engineering

THE PRODUCTION OF BIOFERTILIZER FROM BIODEGRADABLE WASTE OF COLEGIO DE SAN JUAN DE LETRAN-CALAMBA THROUGH COMPOSTING TECHNIQUE

De Pano, Katarungan B. | Dasig Jr., Arsenio R. | Suerte, Micoh Andy C. | Yu, Jaymart D.

Discipline: Mechanical Engineering

DESIGN IMPROVEMENT OF THE ROLLER TYPE CONVEYOR OF THE AUTOMOTIVE AIR-CONDITIONING TECHNOLOGY OF THE PHILIPPINES AT CANLUBANG, CALAMBA LAGUNA

De Pano, Katarungan B. | Dizon, Jerome Lloyd L. | Batalla, Ken Joseph Vincent C. | Castillo, Jes Oliver T.

Discipline: Mechanical Engineering

RE-USE OF TREATED WASTEWATER AT MAJOR FOOD PROCESSING COMPANY IN CANLUBANG, LAGUNA

De Pano, Katarungan B. | Batanes, Paul Djandrey G. | De Lumban, Kennedy R. | Malabanan, Ricardo Rei P.

Discipline: Mechanical Engineering

UTILIZATION OF BY-PRODUCTS OF COCONUT FROM DRILLING PROCESS AT FRANKLIN BAKER COMPANY OF THE PHILIPPINES IN SAN PABLO, LAGUNA

Almario, Virgilio S. | Articona, John Rupert B. | Bautista, Mark Anthony M. | Lauro, Lorenzo L.

Discipline: Mechanical Engineering

Dispute resolution mechanism by dispute resolution board according to FIDIC contract model and experience for Vietnam

Lam, Le Doan | Tho, Le Pham Anh

Discipline: Mechanical Engineering

Evaluating the Role of Project Management Offices (PMOs) in Large-Scale Construction Projects: Insights from Construction Industry Professionals.

Umasekar, Vijayakumar

Discipline: Mechanical Engineering

Multi-Commodity Dryer Cabinet with PID Control and Notification

Cabal, Marielle M. | Andaya, Florante | Armendares, Jason A. | Penino, Jake P. | Reyes, Karl Angelo R.

Discipline: Mechanical Engineering

A Circular Economy: Development of Solar Panel Dismantling and Photovoltaic Cell Recycling Facility in the Philippines

Vanguardia, Sarah C. | Faraon, Claire R. | Isiang, Christine Roselle T. | Llones, Angelica D. | Autos, Odezza Sophia D. | Rey, Jennifer A. | Villanueva, Mariner H. | Monsanto Jr, Marincho B.

Discipline: Mechanical Engineering

PLC Based Prepaid Purified Water Drinking Station

Marquez, Larry

Discipline: Mechanical Engineering